Epson 97, 965 Connecting to an External Computer Monitor, Connecting to a Video Source for Sound

Connecting to a Video Source for Sound

You can play sound through the projector's speaker system if your video source has audio output ports.

If you are projecting video using a Computer port, connect the projector to the video source using an optional stereo mini-jack audio cable.

If you are projecting video using the Video or S-Videoport, connect the projector to the video source using an RCA audio cable.

Note: If you connected your video source to the projector using an HDMI cable, the audio signal is transferred with the video signal; you do not need an additional cable for sound.

1.Connect the audio cable to your video source's audio-out ports.

2.Do one of the following:

•Connect the other end of the cable to the projector's Audio port that corresponds to the Computer port you are using for video.

•Connect the red and white plugs on the other end of the cable to the projector's L-Audio-Rports.

Parent topic: Connecting to Video Sources

Connecting to an External Computer Monitor

If you connected the projector to a computer using a Computer port, you can also connect an external monitor to the projector. This lets you see your presentation on the external monitor even when the projected image is not visible.

If you want to output images to an external monitor when the projector is turned off, you need to select Communication On for the Standby Mode setting and Always On for the A/V Output setting in the projector's menu system.

Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.

34