Epson 99W, 965, 955W, 98, 97 manual Connecting to a Wired Network, Selecting Wired Network Settings

Connecting to a Wired Network

To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network cable. To ensure proper data transmission, use a Category 5 shielded cable or better.

1.Connect one end of the network cable to your network hub, switch, or router.

2.Connect the other end of the cable to the projector's LAN port.

Parent topic: Wired Network Projection

Selecting Wired Network Settings

Before you can project from computers on your network, you must select the network settings for the projector using its menu system.

Note: Make sure you already connected the projector to your wired network using the LAN port.

1.Turn on the projector.

2.Press the Menu button.

43