Epson 965, 955W, 98 Power light, Status light, Lamp light, Temp light, Status and solution, Mode

Power light	Status light	Lamp light	Temp light	Status and solution
Off	Flashing blue	Off	Orange	Projector has overheated and
				turned off. Leave it turned off to
				cool down. Once the Temp and
				Status lights turn off and the power
				light turns blue (after about five
				minutes), try the suggestions
				below:
				• Make sure that the vents and air
				filter are not clogged with dust or
				obstructed by nearby objects.
				• Clean or replace the air filter.
				• If operating the projector at high
				altitude, turn on High Altitude
				Mode.
				• If the problem persists, unplug
				the projector and contact Epson
				for help.
Off	Flashing blue	Orange	Off	Lamp has a problem.
				• Check to see if the lamp is
				burned out, broken, or installed
				incorrectly. Reseat or replace the
				lamp as necessary.
				• Clean or replace the air filter.
				• If operating the projector at high
				altitude, turn on High Altitude
				Mode.
				• If the problem persists, unplug
				the projector and contact Epson
				for help.
Flashing blue	Light status	Flashing	Light status	Replace the lamp soon to avoid
	varies	orange	varies	damage. Do not continue using the
				projector.

135