Epson 955W, 965, 98, 99W Projector Information Display - Info Menu, Projector Lamp Specifications

Projector Information Display - Info Menu

Projector Lamp Specifications

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1.Turn off the projector and unplug the power cord.

2.Allow the projector lamp to cool down for at least one hour.

3.Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you open the lamp cover.

126