Epson 965, 955W Select the Wired LAN menu and press Enter, Select your IP Settings as necessary

•PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control.

•Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web.

•Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it. You must enter a displayed, randomized keyword from a computer using the EasyMP Network Projection software to access the projector.

Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow buttons on the remote control to highlight characters and press Enter to select them.

7. Select the Wired LAN menu and press Enter.

8.If necessary, select IP Settings and press Enter.

9.Select your IP Settings as necessary:

•If your network assigns addresses automatically, turn on the DHCP setting.

•If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed.

Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press Enter.

45