Black Box KVP40004A manual System Hdcp Console Video OUTPUT/EDID Input Status Computer

Chapter 4: On-Screen Display

NOTE: Before changing the security level, set the configuration you wish to work with to the higher security level, under MODE > START. This configuration will be maintained when ServSwitch 4site Flex is reset, in case of power failure, or when power is turned off and on again.

SECURITY LEVEL 8

Security Level 8 allows you to work only on one channel (computer) in a predefined display mode (Quad, Full-Screen, or PiP mode). No settings can be changed, apart from the SECURITY menu item, where you can change the security level.

SYSTEM SECURITY

SECURITY LEVEL 7

With Security Level 7, you can open OSD windows that only show display modes and device settings.

SYSTEM	HDCP
CONSOLE	VIDEO OUTPUT/EDID
VIDEO	INPUT STATUS
COMPUTER	NAME 1-4/ KEYBOARD/MOUSE/EDID/DDC
HELP	HOTKEY/ABOUT/CONTACT

SECURITY LEVEL 6

With Security Level 6, you have the following additional operations:

SYSTEM CONTROL

CONSOLE FADE

•Setting of active channel using front-panel buttons, Hotkeys, or Hotmouse.

•Selecting channel with PiP button in Quad mode.

•Changing the directly selectable PiP channel in PiP mode single direct.

SECURITY LEVEL 5

With Security Level 5, you have the following additional operations:

• Setting of display mode (Quad/Fullscreen/PiP) using front-panel buttons, Hotkeys or Hotmouse.

SYSTEM	TEST PATTERN
CONSOLE	BACKGROUND

SECURITY LEVEL 4

With Security Level 4, you have the following additional settings in the OSD:

SYSTEM	OSD POSITION/WIN MODE
MODE	PIP/START
CONFIGURATION	RECALL
COMPUTER	AUDIO
VIDEO	FORMAT

•Modify display-mode settings in Hotmouse Menu.

•Changing both channels in Dual mode.

•Changing the fixed PiP channel in PiP mode.

Page 30 724-746-5500 blackbox.com