Chapter 7: OSD Console
To control ServSwitch 4site Flex using a touchscreen, connect the touchscreen to the ServSwitch 4site Flex by connecting the VGA or DVI cable from the ServSwitch 4site Flex monitor port to the input of the touchscreen. Connect the USB port of the touchscreen to the ServSwitch 4site Flex console USB port. Please see Chapter 2 for a description of the ServSwitch 4site Flex ports.
Figure 7-5. Console>touchscreen window.
Calibration
After connecting a touchscreen to the ServSwitch 4site Flex for the first time, calibrate the touchscreen.
Open CONSOLE > TOUCHSCREEN menu, choose CALIBRATE, and press ENTER/SELECT.
Four markers will be displayed in the corners of the touchscreen.
The diagram shows the first marker in the top left corner of the screen.
Touching the center of the markers as accurately as possible yields the best calibration results.
Then repeat for the other three markers to complete calibration.
Device Details
Select this option to display touchscreen information such as the manufacturer ID and product ID.
Figure 7-6. Device details screen.
Page 49 |