Chapter 9: OSD Computer
9.2 Audio
Use the arrow keys to navigate in the COMPUTER menu to the entry AUDIO and press ENTER/SELECT to open the AUDIO window.
Figure 9-2. Computer>Audio>Volume screens.
“Enable audio output:” To enable or disable the audio output, activate or deactivate the checkbox “Enable audio output.”
Selecting audio source: Select the audio source from the list. To ensure that the audio source is the computer being currently operated, select ”active channel” from the list. For a fixed audio source, select one of the computers from the list.
Switch channel on audio activity: With this setting enabled, ServSwitch 4site Flex automatically switches to a channel on which an audio signal is detected.
Volume: To adapt the volume of the audio sources, navigate to VOLUME and press enter/select.
Use this window to adjust the volume for the audio sources in
Change the volume of each channel with + and -
Page 64 |