Black Box servswitch 4site flex, KVP40004A manual Appendix C Update ServSwitch 4site Flex Firmware

Appendix C: Update ServSwitch 4site Flex Firmware

Appendix C: Update ServSwitch 4site Flex Firmware

To execute a firmware update, you need:

•a computer with serial or USB port

•the enclosed “serial cable” (RJ-45-DB9 adapter + RJ-45 CAT5 cable) or a USB cable (USB-A/USB-B)

•the current executable firmware file

Follow these steps:

1a. Use the serial cable to connect the COM port of your computer to the RS-232 port on ServSwitch 4site Flex.

OR

1b. Use the USB cable to connect the USB port of your computer to the USB port on ServSwitch 4site Flex.

NOTE: The virtual COM port USB driver can be downloaded from the Future Technology Devices International Ltd. Web site at www.ftdichip.com/Drivers/VCP.htm

USB

COM

Figure C-1. Rear panel.

724-746-5500 blackbox.com Page 93