Black Box KVP40004A, servswitch 4site flex manual OSD-Main Menu Window

Chapter 4: On-Screen Display

VIDEO (continued)	CROPPING	Crop the display of video sources
	BRIGHTNESS	Set brightness of analog input signal
	CONTRAST	Set contrast of analog input signal
	HORIZ POSITION	Horizontal screen position
	VERT POSITION	Vertical screen position
	SCREEN WIDTH	Set screen width of analog input signal
	PHASE	Adjust phase of analog input signal
	FORMAT	Fit input format to screen
COMPUTER	CHANNEL MAPPING	Assign an input port to a channel
	AUDIO	Enable audio output/Audio source selection/Volume
	NAME 1–4	Assign computer names
	KEYBOARD	Display type of keyboard (PC1, PC2, PC3, or USB)
	MOUSE	Display type of mouse (PS/2, PS/2 Wheel, or USB)
		Set USB mouse positioning (absolute/relative)
	RESET PS/2	Reset PS/2 mouse and keyboard
	EDID/DDC	Program input EDID
USB DEVICE 1-4	USB PORT STATUS	Shows USB 2.0 matrix status and allows
		USB ports to be assigned to a device
HELP	ABOUT	Firmware / hardware version, serial number, etc
	HOTKEY	List of keyboard commands
	CONTACT	Contact information

4.2 OSD—Main Menu Window

There are three ways to open the OSD main menu (Figure 4-2):

1.Use a keyboard command: “hotkey“ + “O.” (letter “O”)

2.Simultaneously press front-panel buttons “PiP“ + “Win“ for longer than one second.

3.Remotely open the OSD via ConfDev program on an external PC with serial or USB connection.

Page 20 724-746-5500 blackbox.com