White Paper ⏐ Issue: October 2006 ⏐ Integration of BX600 SB9 Switches in Cisco NetworksPage 36 / 47
Step 3: Test the configuration
When running in SNTP unicast mode, the output is as follows:
Last Update Time: |
| AUG | 21 13:34:59 2006 |
Last Unicast Attempt Time: | AUG | 21 13:34:59 2006 | |
Last Attempt Status: | Success | ||
Broadcast Count: |
| 0 |
|
Time Zone | : MEST 02:00 Before UTC | ||
|
| ||
Client Supported Modes: | unicast broadcast | ||
SNTP Version: |
| 4 |
|
Port: |
| 123 | |
Client Mode: |
| unicast | |
Unicast Poll Interval: | 6 | , which mean 2^6 in seconds | |
Poll Timeout (seconds): | 5 |
| |
Poll Retry: |
| 1 |
|
Current Time : 8/21/2006 13:36:20
When running in STNP broadcast mode, the output is as follows:
Client Supported Modes: | unicast broadcast | ||
SNTP Version: |
| 4 |
|
Port: |
| 123 | |
Client Mode: |
| broadcast | |
Broadcast Poll Interval: | 6 | , which mean 2^6 in seconds | |
|
| ||
Last Update Time: |
| AUG | 21 13:55:16 2006 |
Last Unicast Attempt Time: | AUG | 21 13:40:22 2006 | |
Last Attempt Status: | Success | ||
Broadcast Count: |
| 2 |
|
Time Zone | : MEST 02:00 Before UTC | ||
At the syslog server, entries may look like as follows:
17.08.2006 13:29 Kernel.Info 10.0.2.70AUG 17 13:27:56
17.08.2006 13:31 | Kernel.Notice10.0.2.70 | AUG 17 13:30:11 | |||
traputil.c(703) 37 %% Link Up: Unit: 1 | Slot: 0 | Port: 11 | |||
17.08.2006 13:31 | Kernel.Notice10.0.2.70 | AUG 17 | 13:30:11 | ||
traputil.c(703) 38 %% Link Up: Unit: 1 | Slot: 0 | Port: 12 | |||
17.08.2006 13:31 | Kernel.Notice10.0.2.70 | AUG 17 | 13:30:11 | ||
traputil.c(703) 39 %% Link Up: Unit: 1 | Slot: 1 | Port: 1 | |||
17.08.2006 14:02 | Kernel.Notice10.0.2.70 | AUG 17 | 14:01:23 | ||
traputil.c(703) 48 %% Link Up: Unit: 1 | Slot: 1 | Port: 2 | |||
17.08.2006 14:02 | Kernel.Notice10.0.2.70 | AUG 17 | 14:01:54 | ||
traputil.c(703) 49 %% Link Down: Unit: 1 Slot: 0 Port: 14