Fujitsu BX600 SB9 manual Bring up the affected ports, Verify the operation of the port-channels

White Paper ⏐ Issue: October 2006 ⏐ Integration of BX600 SB9 Switches in Cisco Networks Page 7 / 47

channel-group 2 mode on end

Step 3: Bring up the affected ports

!SB9

interface range 0/11 – 0/14 no shutdown

exit end

!Cisco A interface Po 1

no shutdown end

!Cisco B interface Po 2

no shutdown end

Step 4: Verify the operation of the port-channels

! SB9

(SB9) #show port-channel

Logical Interface Port-Channel Name Link State Mbr Ports				Active Ports
1/1-----------------	----------------- ----------		---------- ------------
	Po1	Up	0/11,0/12	0/11,0/12
1/2	Po2	Up	0/13,0/14	0/13,0/14
! Cisco A
Cisco-A#show etherchannel summary
Flags:	D - down	P - in port-channel
	I - stand-alone s - suspended
	H - Hot-standby (LACP only)
	R - Layer3	S - Layer2
	U - in use	f - failed to allocate aggregator
	u - unsuitable for bundling
	w - waiting to be aggregated
	d - default port
Number of channel-groups in use: 1
Number of aggregators:		1

Group	Port-channel	Protocol	Ports
1------	+-------------	+-----------	+----------------------------------------------	Gi0/2(P)
	Po1(SU)	-	Gi0/1(P)
! Cisco B
Cisco-A#show etherchannel summary
Flags:	D - down	P - in port-channel
	I - stand-alone s - suspended
	H - Hot-standby (LACP only)
	R - Layer3	S - Layer2
	U - in use	f - failed to allocate aggregator
	u - unsuitable for bundling
	w - waiting to be aggregated
	d - default port
Number of channel-groups in use:			1
Number of aggregators:			1
Group	Port-channel	Protocol	Ports
1------	+-------------	+-----------	+----------------------------------------------	Gi0/2(P)
	Po1(SU)	-	Gi0/1(P)