Xerox 721P85600 manual Hz Delta printer outlet voltages

PREINSTALLATION

50 Hz DELTA printer outlet voltages

Note: All power outlets must be dedicated only to this equipment.

Ensure that each power cord has a separate circuit.

50 Hz DELTA configurations only: Measure the DELTA connection voltages at the power source. The required voltages are shown in table 3-11.

Consult with your service representative to determine the type of plug and receptacle to be used for your 50 Hz printer.

Table 3-11.Printer (50 Hz only) DELTA connection for 220/230/ 240 V Service outlet

Service outlet
configuration	Measurement	Nominal	Range
4 Wire 220 V	Line 1 to Line 2	220 V RMS	198-242 V RMS
4 Wire 220 V	Line 2 to Line 3	220 V RMS	198-242 V RMS
4 Wire 220 V	Line 1 to Line 3	220 V RMS	198-242 V RMS
4 Wire 230 V	Line 1 to line 2	230 V RMS	207-253 V RMS
4 Wire 230 V	Line 2 to line 3	230 V RMS	207-253 V RMS
4 Wire 230 V	Line 1 to line 3	230 V RMS	207-253 V RMS
4 Wire 240 V	Line 1 to Line 2	240 V RMS	216-264 V RMS
4 Wire 240 V	Line 2 to Line 3	240 V RMS	216-264 V RMS
4 Wire 240 V	Line 1 to Line 3	240 V RMS	216-264 V RMS

3-20 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE