3.Preinstallation
This chapter assists you in preparing for the installation of your DocuPrint 96/DocuPrint 96MX Laser Printing System (LPS). Consult your customer support representative for the requirements of any optional equipment or communications devices that may have been ordered. For example, the peripheral cabinet and bypass transport options have space requirements, and Ethernet requires that you establish an Ethernet address. Refer to the “LPS options” chapter of this guide for further information.
Keep in mind that preparing for your LPS installation is a responsibility shared by both your site and your Xerox or Xerox Limited representatives. Your representatives are available to discuss installation issues and to assist you in completing the site installation responsibilities as follows:
•
•
•
•
LPS space and delivery requirements
Environmental and electrical requirements
Cabling requirements
Supply requirements
If you have purchased additional equipment for use with your DocuPrint 96/DocuPrint 96MX LPS, such as finishers or feeders, from a company other than Xerox, it is important to remember to work with the representatives of the company when planning the installation. Space planning, electrical and environmental requirements, and so forth, are important considerations to remember.
LPS delivery requirements
Dimensions and weights of the DocuPrint 96/DocuPrint 96MX LPS system controller and printer are listed in this chapter, along with diagrams to help you visualize the sizes and total space requirements.
Note: For information on sharing space and other space planning considerations, refer to the “Space planning guidelines” section of this chapter. Space planning templates, a space planning template transparency, and a grid are also provided at the end of this chapter to assist you in planning the placement of your DocuPrint 96/ DocuPrint 96MX LPS. Contact your service representative if you have questions not specifically addressed in this guide.
The following diagrams represent top views of the components, surrounded by the required minimum clearance on all sides.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE |