POWER ON/OFF
Switching On and Off
B
A
Switching On
Note: Load media in the drawers before switching on the power or after the printer is ready to print
.
1.Press the Printer power switch
(A) to the on (I ) position.
2.Press the power switch (B) for the Controller (if installed) to the on (I ) position.
PRINTER IS WARMING UP |
L9......L0 |
•The printer will count down briefly from L9 to L0 while the fuser is warming up to the operating temperature.
•After the count down is complete, the printer will be On Line and ready to print.
Switching Off
1.Press the Controller power switch
(B) to the Off (0) position.
2.Press the printer power switch (A) to the off (0) position
XES Synergix 8825/8830 Printer Operator Manual | 9 |