POWER ON/OFF
Power Saver, Rest Modes
POWER SAVER MODE | FUSER IS AT LOW |
POWER. PRESS [ENTER] TO WARM UP PRINTER | |
The printer will go through two stages of power conservation after a preprogrammed time interval of no print activity or control panel activity:
1) POWER SAVER MODE
Using the printer menu, you can adjust the time interval that the printer remains in the Ready mode from 5 to 50 minutes. After this preset interval, the printer will enter the Power Saver mode. Refer to the Off Line Menus section of this manual for instructions.
XES Synergix 8825/8830 Printer Operator Manual | 10 |
REST MODE | FUSER IS OFF |
PRESS [ENTER] TO WARM UP PRINTER. | |
2) REST MODE
In the Rest mode, a minimum of power is supplied to the printer.
Using the printer menu, you can adjust the time interval that the printer remains in the Power Saver mode from 15 to 150 minutes. After this preset interval, the printer will enter the Rest mode. Refer to the Off Line Menus section of this manual for instructions.
A print request returns the printer to the