Xerox 8825/8830 manual Error Messages

PROBLEM SOLVING

Media Jams

XES Synergix 8825/8830 Printer Operator Manual 30

Error Messages

A

B

ERROR MESSAGE	PROBLEM		SOLUTION
CHECK FOLDER	Finisher Config Type	1.	Press the
FOLDER	enabled but no folder is		ONLINE/OFFLINE
COMMUNICATIONS	installed.		button to take the
ERROR #17			printer OFFLINE.
		2.	Refer to Finisher
			Settings on page
			27 and reset the
			value to NONE
F2-01 CHECK	Finisher Config Type	1.	Switch OFF the
FOLDER	enabled but no folder is		Printer.
FOLDER	installed.	2.	Wait 5 seconds and
COMMUNICATIONS			switch ON the

8.Unlatch (A) and open (B) the Cutter Drawer.

9.Locate and remove any media from the Cutter area.

10.Close the Cutter Drawer.

11.The printer will resume printing when all jam locations have been cleared. If the problem continues, call for service.

ERROR #01	printer
3. As soon as the
	Printer Firmware
	Version message is
	displayed, press the
	ONLINE/OFFLINE
	button to take the
	printer OFFLINE.
4.	Refer to Finisher
	Settings on page
	27 and reset the
	value to NONE