OFF-LINE MENUS
Printer Menu - Finisher Settings
FINISHER SETTINGS |
<FINISHER CONFIG TYPE = NONE> |
7.When FINISHER SETTINGS is displayed on the Control Panel, press the Enter button to display the first feature.
8.Press the Enter button to select the FINISHER feature, or go to step 5 to select the next feature.
FINISHER CONFIG TYPE = <001> |
3.Press the Next (or the Previous) button in order to scroll through the available settings.
4.Press the Enter button in order to enter your selection, or press Exit if no change is required.
NOTE: Refer to the Folder User Guide for the appropriate value.
5.Press the Exit button in order to return to the FINISHER SETTINGS submenu.
XES Synergix 8825/8830 Printer Operator Manual | 25 |