CARE
Replacing the Toner Cartridge
A |
| B |
|
| |
|
| A |
|
|
|
10.Lower the Toner Cartridge into position while pushing the plunger (A) toward the front of the printer, then release the plunger.
11.Rotate the Toner Cartridge back and forth until the cartridge locks into position in the rear drive collar.
CAUTION | 13. Close the cover. | 14. Close the Toner Supply Access |
Remove the red cover tape |
| Cover on the printer. |
|
| |
carefully. Do not remove the clear, |
|
|
perforated seal. |
|
|
12.Remove the red cover tape (A) from the Toner Cartridge; do not remove the seal (B) under the tape.
XES Synergix 8825/8830 Printer Operator Manual | 35 |