SAFETY NOTES (continued)
GROUND FAULT PROTECTION
The printer is equipped with an additional safety feature, a Ground Fault Interrupter (GFI). This safety device will remove all power to the printer if an electrical fault is detected by the GFI.
In the event that power is interrupted to the printer, locate the GFI safety device located on the right side of the printer next to the power cord:
Check that a red indicator appears in the window (A) of the safety device as shown opposite.
If no indicator is present, press and release the black RESET button
(B). The red indicator should appear in the window, and power should be restored to the printer.
If the device interrupts power to the printer again, or if power is not restored by performing the above procedure, call Xerox Service to correct the problem.
XES Synergix 8825/8830 Printer Operator Manual | 4 |
A
B