SAFETY NOTES (continued)
GROUND FAULT PROTECTION
The XES 8855 Engineering Printer is equipped with an additional safety feature, a Ground Fault Interrupter (GFI). This safety device will remove all power to the printer if an electrical fault is detected.
In the event that power is interrupted to the printer, locate the GFI safety device on the power cord:
Check that a red indicator appears in the window (A) of the safety device shown opposite.
If no indicator is present, press and release the black RESET button (B). The red indicator should appear in the window, and power should be restored to the printer.
if the device interrupts power to the printer again, or if power is not restored by performing the above procedure, call Xerox Service to correct the problem.
4
A
B