Xerox XES 8855 manual Dehumidifier

Page 20

MEDIA INFORMATION

Dehumidifier

The printer is equipped with heaters, which maintain the media at a constant temperature. The heaters operate at night and in high- humidity conditions, in order to avoid moisture-related problems with the media.

Xerox Service can set the heaters to operate in three modes:

1.off when printing

2.off when printer is switched on.

3.on all the time.

The heaters continue to operate when the printer is switched off, as long as the printer is connected to a live power outlet.

14

1.Open the Top Cover in order to locate the Dehumidifier Switch.

2.Set the switch to the correct position for damp or dry conditions:

In damp conditions, the dehumidifier switch should be set to the H position.

In dry conditions, the dehumidifier switch should be set to the L position.

Image 20
Contents XES 8855 Printer User Guide EMC Notices USA Trademark Acknowledgments Safety Notes Safety notes Table of Contents Safety Notes Safety Notes Ground Fault Protection Printer Overview Front ViewRear View Right Side View Page Media Information Loading the Media Rolls 1, 2Roll 3 only Loading the Media Roll Media Information Making a Test Print Dehumidifier Manual Bypass Feed Page Problem Solving Status IndicatorsError Codes CodeCause/What to DoProblem Solving Top Drawer is not closed. Open and close Clearing the Media Path Media Jam J-01, J-02Media Jam J-03 Media Jam J-04 Media Jam J-05 Media Jam J-11 Media Jams J-12, J-13 Media Jam J-14 Page Care Replacing the Toner CartridgeCare Replacing the Toner Waste Container Replacing the Oil Pads Cleaning the Upper Corotron Cleaning the Lower Corotron Product Specifications XESPower Consumption FCC Compliance in the USA EME Compliance in Canada Conformité EEM au Canada701P9241412/00