Xerox XES 8855 manual Media Jam J-11

Page 31

CLEARING THE MEDIA PATH

Media Jam J-11

1.Open the Manual Bypass Shelf and all three drawers in order to locate the jam.

2.Rewind the jammed roll until the lead edge of the paper comes out of the feed rollers.

4.If you are unable to rewind the jammed roll easily, gently loosen the jam through the opening at the rear of the Manual Bypass Shelf.

5.Remove any scraps or torn pieces of paper from the inside of the printer.

6.Trim the lead edge of the roll squarely to remove any torn or wrinkled paper.

6.Insert the lead edge of the paper between the upper and lower feed rollers and feed an inch of paper between the feed rollers.

7.Roll 3 only: Rotate the lower feed roller until the lead edge is visible in the center of the viewing hole.

8.Push the drawers and Manual Bypass Shelf into the closed and latched position.

25

Image 31
Contents XES 8855 Printer User Guide EMC Notices USA Trademark Acknowledgments Safety Notes Safety notes Table of Contents Safety Notes Safety Notes Ground Fault Protection Front View Printer OverviewRear View Right Side View Page Loading the Media Rolls 1, 2 Media InformationRoll 3 only Loading the Media Roll Media Information Making a Test Print Dehumidifier Manual Bypass Feed Page Status Indicators Problem SolvingCodeCause/What to Do Error CodesProblem Solving Top Drawer is not closed. Open and close Media Jam J-01, J-02 Clearing the Media PathMedia Jam J-03 Media Jam J-04 Media Jam J-05 Media Jam J-11 Media Jams J-12, J-13 Media Jam J-14 Page Replacing the Toner Cartridge CareCare Replacing the Toner Waste Container Replacing the Oil Pads Cleaning the Upper Corotron Cleaning the Lower Corotron XES Product SpecificationsPower Consumption Conformité EEM au Canada FCC Compliance in the USA EME Compliance in Canada701P9241412/00