Safety Notes
Your XES Synergix 8825/8830/8855 Digital Solution has been designed and tested to meet strict safety requirements. These include safety agency examination and approval plus compliance with established environmental standards.
Please read the following instructions carefully before operating the XES Synergix 8825/8830/8855 Digital Solution and refer to them as needed to ensure continued safe operation.
Follow all warnings and instructions marked on or supplied with the product.
Unplug the units from the wall outlet before cleaning the exterior. Always use materials specifically designated for the XES Synergix 8825/8830/8855 Digital Solution. Use of other materials may result in poor performance and could create a hazardous situation.
Do not use aerosol cleaners. Follow the instructions in this operator manual for the proper cleaning methods.
Never use supplies or cleaning materials for purposes other than what they were intended. Keep all supplies and materials out of the reach of children.
Do not use the units near water, wet locations, or outdoors.
The components of this product are equipped with a
Never use a ground adapter plug to connect the system to a power source that lacks a ground connection terminal.
This system should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your local power company.
The power supply cord is the disconnect device for this equipment. Make sure that the installation is near the socket outlet and is easily accessible.
Do not allow anything to rest on the power cord. Do not locate the units where someone will step on the cord.