CARE
Replacing the Oil Pads
Three oil pads, which apply silicone oil to the surface of the fuser roll, are located under the fuser cover. The oil pads are packed as part of the toner and supplies kit, which also contains eight toner cartridges and four toner waste containers.
The oil pads should be replaced at the same time that the first of the eight toner cartridges is used in the printer.
WARNING
Switch the printer off and allow the fuser to cool for 15 minutes before replacing the oil pads.
Avoid contact with face or eyes and wipe/wash your hands thoroughly after handling.
32
1.Open the fuser cover.
2.Replace the three oil pads as shown.