SAFETY NOTES
Your XES 8855 Engineering Printer has been designed and tested to meet strict safety requirements. These include safety agency examination and approval and compliance to established environmental standards.
Please read the following instructions carefully before operating the XES 8855 Engineering Printer and refer to them as needed to ensure the continued safe operation of the product.
Follow all warnings and instructions marked on or supplied with the product.
Unplug the printer from the wall outlet before cleaning the exterior. Always use materials specifically designated for the XES 8855 Engineering Printer. Use of other materials may result in poor performance and could create a hazardous situation.
Do not use aerosol cleaners. Follow the instructions in this operator manual for the proper cleaning methods.
Never use supplies or cleaning materials for purposes other than what they were intended. Keep all supplies and materials out of the reach of children.
Do not use this product near water, wet locations, or outdoors.
2
This product is equipped with a
Never use a ground adapter plug to connect the printer to a power source that lacks a ground connection terminal.
This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your local power company.
The power supply cord is the disconnect device for this equipment. Make sure that the installation is near the socket outlet and is easily accessible.
Do not allow anything to rest on the power cord. Do not locate the printer where someone will step on the cord.
(continued)