Xerox 12CP manual Maintenance safety

Page 6

Maintenance safety

Do not attempt any maintenance procedure that is not specifically described in the documentation that is supplied with your In-line Stapler Finisher.

Do not use aerosol cleaners. The use of supplies that are not approved may cause poor performance of the In-line Stapler Finisher, and could create a dangerous condition.

Use the supplies and cleaning materials only as directed in the DocuColor 12 System Administration Guide or Document Centre ColorSeries 50 System Administration Guide. Keep all of these materials out of the reach of children.

Do not remove the covers or guards that are fastened with screws. There are no parts behind these covers that you can maintain or service.

Do not perform any maintenance procedures unless you have been trained to do them by a Xerox representative or unless a procedure is specifically described in this guide or one of the copier/printer manuals.

Follow all warnings and instructions that are marked on, or supplied with, the machine.

Refer to the Safety Notes in the copier/printer user guide for proper placement of the equipment.

Be careful when working in areas identified with this warning symbol. These areas may be very hot and could cause personal injury.

If you need any additional safety information concerning the machine or materials, contact your Xerox representative.

2

IN-LINE STAPLER FINISHER USER GUIDE

Image 6
Contents Page USA Contents Ordering supplies Customer support Technical data Safety notes Electrical safetyMaintenance safety Overview Xerox DocuColor 12 with a Finisher/MailboxFinisher/Mailbox configuration Finisher/Sorter configurationComponents Finisher ComponentsWindows Select the Device Settings tabEnabling the Finisher options Select Finisher Output Tray + MailboxWindows 95/98 Windows NTSelect Configure Mac OS 7.6 and abovePrinter driver selection Finished example Using the FinisherStapling options Stapling optionsResolving stapling conflicts Helpful HintsPrinter driver selection Stapling mixed size documentsRotate Stapling options with RotatePrinting procedures From WindowsClick on Document Options From Windows 95/98 From Windows NTClick the Device Options tab From Mac OS 7.6 and above Using CentreWare Internet Services Checking the device profile informationChecking the status of the Finisher output trays Checking the Staple Cartridge status Changing the out-of-staple default setting Enter your user name and passwordAdding staples Pressing the Gold Release LatchRemoving the empty Staple Pack From the Staple Cartridge Removing the paper tape from Staple Pack Problem solving Clearing paper jamsInterface Area jam Removing paper from the Interface Area Area 5 jam Lowering HandleArea 7 jam Pulling up on HandleArea 7 and 8 jam Swinging Handle 8 to the rightArea 9 jam Lifting the Finisher Exit Cover Removing paper from AreaProblem solving table Problem Cause and solutionOrdering supplies Customer supportTechnical data Page 701P34148