AUDIT LOG RECORD FORMAT
Audit flags
Flag bits are set to the hex values shown to map the state of the audit logger.
0x0001 = input in process
0x0002 = output in process
0x0004 =
0x0008 = input complete
0x0010 = output complete
0x0020 = log is complete
0x0040 = log is deleted
0x0080 = log completion is pending
0x0100 = BTEXT RPT signal data received
0x0200 = audit logging initialized for a report
0x0400 = BTEXT PAG signal data received
0x1000 = Btrieve
0x2000 = Btrieve report audit file open
0x4000 = master directory up to date
Completion status codes
Completion status codes are bit flags. They are classed as primary and secondary, so multiple flags can be set at any one time resulting in a value that is the sum of several flags.
The audit log report will display a description of the most significant status code when multiple flags are set.
Primary codes
0= normal completion
1= operator issued SPACE PAGES command
2=
4= data on page exceeded page size
8= graphic memory size exceeded
16 = font memory size exceeded
32 = report too big for available memory
64= too much data on a page or duplex
128= irrecoverable graphics imaging error
256= irrecoverable disk or imaging hardware error
512= account page not printed because of aborted job
1024 = unable to recover to page boundry following a system crash
2048 = successive page recovery used
4096 = secondary report completion code used
8192 = operator issued ABORT O command
16384 = operator issued ABORT JOB # command
24576 = operator issued RESET command
XEROX 4635 LPS PRODUCT REFERENCE |