Xerox 721P83071 manual Key audit report calculations, Secondary codes

AUDIT LOG RECORD FORMAT

Secondary codes

1= data stream stock call out was overridden by operator

2= SIZING option caused report to abort

4 = RASTER

8= more than 16 TL/DL blocks were used on one page

16= CODE = NONE error was detected during printing

32= set integrity problem

64= graphic off leading edge of page

Key audit report calculations

	This section provides additional information on how some
	of the key fields shown are calculated.
Good sheets fed by source	The number of good sheets fed from each tray is stored in
	order in the good sheets fed array of the log header
	record. Trays 1-7 correspond in order to words 1-7 of the
	array.
Total good sheets fed	The total number of good sheets fed is the sum of all of
	the values in the good sheets fed array in the log header
	record.
Good sheets delivered by destination	The number of good sheets delivered to a particular
	destination correspond to the values in words 1-6 in the
	good sheets delivered array of the log header record as
	follows: S = sample tray, A = bin A, B = bin B, C = bin
	C, D = bin D, E = bypass transport.
Waste sheets fed by source	The number of sheets fed from each tray is stored in order
	in the waste sheets fed array in the log header record.
	Trays 1-7 correspond in order to words 1-7 of the array.
Total waste sheets fed	The total number of waste sheets fed is the sum of all of
	the values in the waste sheets fed array of the log header
	record.
Waste sheets delivered by destination	The number of waste sheets delivered corresponds to the
	values in words 1 and 7 (sample tray and purge tray) in the
	waste sheets delivered array of the of the log header
	record. The sheets removed value is obtained by
	subtracting the sum of words 1 and 7 from the total waste
	sheets fed value.

A-10 XEROX 4635 LPS PRODUCT REFERENCE