PRODUCT DIFFERENCES/USER CONSIDERATIONS
deletion will be noticed if no data is printed on the portion of paper that extends past the blade.
If you frequently use
·The activation of the blade is timed to place it on the lead edge of the sheet of paper as it moves through the system. The placement of the activation can vary with the actual speed of paper. Therefore, performance may demonstrate some deletions on the lead 0.25 inches/6mm of the page. In particular, solid black lines on the lead edge of the page should be avoided if this is a major concern to you.
A consideration resulting from the very solid black characters that the 4635 LPS can print is that toner on the lead edge of the paper may cause the sheet to stick to the fuser, due to the consistency and solidness of the toner. In order to eliminate fuser jams caused by this condition, the system uses a digital screen to lighten automatically any solid areas printed in the first
0.25inches/6mm of the lead edge. If the solid areas are small, the amount of screen is barely noticeable, if at all. However, with very large solid black areas, the effect may not be acceptable. The system does provide an override using the Lead Edge Screen window at the PC UI, or the EDGE command entered at the command line. This window or command allows you to enable or disable the lead edge screen; however, overriding the screen in this manner is likely to increase fuser jams.
For particular applications, it is recommended that you run test prints both with and without the screen to ascertain which mode is most appropriate for you.
For more information on the Lead Edge Screen window, refer to the Xerox 4635 LPS Operator Guide or the Xerox 4635 LPS PC User Interface Reference. For more information on entering the EDGE command at the command line, refer to the Xerox 4635 LPS Operator Guide or the Xerox 4635 LPS Operations Reference.
Print Darkness
The 4635 LPS provides you with capabilities for tuning your output print quality to meet the particular needs of your application. The Print Darkness window at the PC UI is a feature which allows you to adjust darkness of printed characters and images. Print darkness is a scale from 1 to 9, which either darkens or lightens the image, as well as broadening or thinning the look of various characters. The nominal setting is 5, which provides the optimal mix of darkness and line thickness.
It is recommended that you test the Print Darkness feature to determine the best setting for your site or application. For more information on the Print Darkness window, refer to the Xerox 4635 LPS Operator Guide or to the Xerox 4635 LPS PC User Interface Reference. For more information on entering the DARKNESS command at the command line, refer to the Xerox 4635 LPS Operator Guide or the Xerox 4635 LPS Operations Reference.
XEROX 4635 LASER PRINTING SYSTEM PRODUCT REFERENCE |