Clearing a jam in the fuser
WARNING: The fuser surface is very hot.
!Do not touch the fuser or you may be burned.
Show how to clear a paper jam in the fuser.
1.See Figure 15. Pull out the lower left side unit as far as it will go.
2.Remove the jammed paper. Be sure no torn pieces of paper are left inside.
Do not touch the white roller on the oil
!roll cartridge. The oil will stick to your skin.
3.Place two pieces of paper on a flat surface to set the oil roll cartridge on when you remove it.
4.See Figure 16. Remove the oil roll cartridge and set it aside.
5.Removed the jammed paper in the direction of the arrow. Be sure no torn pieces of paper are left inside the fuser area.
6.See Figure 17. Reinsert the oil roll cartridge.
7.Push the lower left unit firmly back into the copier/ printer.
Getting to Know Your Product
2
1
Figure 15
45
Figure 16
6
7 
Figure 17
QuickStart Practice Guide | 7 |