Making reductions and enlargements
1.See Figure 46. Open the ADF or document cover.
2.Place an original face down on the document glass. Orient the original for short edge feed.
3.Close the ADF or document cover.
1
3 2
Figure 46
4.See Figure 47. Press the Copy button.
5.Under Paper Supply, select Auto.
6.Under Reduce/Enlarge, press the s or t but- tons to select one of the standard enlargement or reduction ratios, between 64% and 200%.
7.Press the Original Type button.
8.Press the s or t buttons to highlight the desired color mode on the display.
9.Press the Select button.
10.Press the Start button.
11.A copy will be produced that is reduced or enlarged from the size of the original.
12.Press the Clear All button to restore the original settings.
|
|
|
| 4 | 12 |
6 | 5 | 7 | 8 | 9 | 10 |
|
|
Figure 47
Getting to Know Your Product
18 | QuickStart Practice Guide |