Xerox 701P31131 Activity 4 Making copies, Making colored copies from the document glass

Activity 4: Making copies

The DocuColor 4 Copier/Printer allows you to select the color mode to produce copies that are the best quality.

See Figure 39. When the Original Type button is pressed, the color mode display appears.

1.Color - Text/Phto: This is the default setting and should be used when the original contains both text and photographs in color.

2.Color - PrintPhto:- Use this setting when you are copying printed photographs (catalogs, mag- azines, etc.) in color.

3.Color - Phtograph: Use for copying developed photographs or negative films (not printed pho- tos) in color.

4.B/W - Text/Phto: This setting is for copying black and white documents containing both text and photographs.

5.B/W - Text: When the document being copied only contains black and white text, this mode should be used.

Making colored copies from the document glass

Choose, then press Select

Color - Text/Phto B/W - Text/Phto

Color - PrintPhto B/W - Text

Color - Phtograph

Figure 39

Note: Use the color test pattern supplied with the DocuColor 4 Copier/Printer.

To make a single-sided copy from the document glass:

1.See Figure 40. Raise the document glass cover or ADF.

2.Place the 8.5 x 11 in. colored original face down and flush against the left rear corner of the docu- ment glass.

3.Lower the document glass cover or ADF.

1

3

2

Figure 40

Getting to Know Your Product

QuickStart Practice Guide 15