7.See Figure 31. Turn the peach colored lever “B”
clockwise until the lever aligns with the locked symbol ( 
) on the copier/printer.
8.Turn the peach colored cover “A” clockwise until the “l” mark on the cover aligns with the locked symbol ( 
) on the copier/printer.
7
Lever “B”
8
Cover “A”
Figure 31
9.See Figure 32. Close the front cover of the copier/ printer.
Replacing the fuser oil roll cartridge
Show how to remove and replace the fuser oil roll cartridge.
1.See Figure 33. Pull out the lower left side unit as far as it will go.
2.Place two pieces of paper on a flat surface to set the oil roll cartridge on when you remove it.
3.Remove the used fuser oil roll cartridge and set it aside.
9
Figure 32
3
1
Figure 33
Getting to Know Your Product
12 | QuickStart Practice Guide |