Loading paper in the bypass tray
Demonstrate how to open the bypass tray and load paper.
1.See Figure 4. Open the bypass tray by swinging the door down.
2.Ensure the guide at the front of the tray is flipped up unless 13 x 19 in. (330 x 483 mm) paper is being used.
3.See Figure 5. Set the paper guide to the width of the paper being loaded.
4.Load a stack of paper long edge feed and slide the paper into the copier/printer until it stops.
Getting to Know Your Product
2
1 
Figure 4
4
3
Figure 5
QuickStart Practice Guide | 3 |