Canon 730i, MultiPASS MP730, MP700 manual Document handling, Document requirements

Chapter

2 Document handling

Document requirements

The documents you load on the platen glass or Fax Model ADF for copying, scanning, or Fax Model sending must meet these requirements:

	Platen glass						ADF
						Fax Model
Document	• Special types of paper					Multipage documents of the same
type	• Photographs					size, thickness, and weight.
	• Book
	•				Documents that are not
			Fax Model
		suitable for the ADF.
Size	Max. 8 !/2 × 14 in. (216 × 356 mm)					Max. 8 !/2 × 39 in. (216 mm × 1 m)
(W × L)				Max. 8 !/2 × 11 #/4 in.		Min. 4 !/8 × 5 &/8 in. (105 × 148 mm)
		Fax Model
				(216 × 297 mm)
Quantity	• 1 sheet					• Max. 35 letter- or A4-size sheets
	• 10 photographs for multi-scan					(20 lb. or 75 g/m2 paper)
						• Max. 30 legal-size sheets
						(20 lb. or 75 g/m2 paper)
						• 1 sheet for sizes other than these.
Thickness	Max. #/4 in. (20 mm)					0.002 to 0.005 in. (0.06 to 0.13 mm)
Weight	—					13 to 24 lb. (50 to 90 g/m2)

Problem documents

•Make sure any glue, ink, or correction fluid on the document is completely dry before loading.

•Remove all fasteners (staples, paper clips, etc.) before loading.

•Fax Model To prevent jams in the ADF, do not use any of the following:

–Wrinkled or creased paper	–Carbon paper or carbon-backed paper
–Curled or rolled paper	–Coated paper
–Torn paper	–Onion skin or thin paper
–Hole-punched paper

2

Document handling

Chapter 2 Document handling 2-1