Canon MP800 List of Error Display / Indication, Operator Call Errors by Alarm LED Lit in Orange

Page 10

2. LIST OF ERROR DISPLAY / INDICATION

Errors and warnings are displayed on the LCD.

2-1. Operator Call Errors (by Alarm LED Lit in Orange)

Error

Error code

No paper (ASF).

[1000]

No CD / DVD tray*1.

[1001]

No paper in the front

[1003]

paper feed cassette.

 

No CD or DVD*1.

[1002]

Message on the LCD Auto sheet feeder.

There is no paper. Load paper and press [OK].

There is no CD-R tray. Attach the tray and press [OK].

Cassette.

There is no paper. Load paper and press [OK].

Printable disc is not set. Correctly place a disc in the CD-R tray and press [OK].

Solution

Set the paper in the ASF, and press the OK button.

Set the CD / DVD tray, and press the OK button.

Set the paper in the cassette, and press the OK button.

Set a CD or DVD in the CD / DVD tray (which is ejected at error occurrence), and inset the CD / DVD tray in the proper position. Then, press the OK button.

Paper jam.

[1300]

Paper jam in the rear

[1303]

guide.

 

Paper jam in the under

[1304]

guide.

 

No ink.

[1600]

Ink tank not installed.

[1660]

The print head is not

[1401]

installed, or it is not

 

properly installed.

 

Print head temperature

[1403]

sensor error

 

Faulty EEPROM data of

[1405]

the print head

 

Inner cover open before

[1841]

start of printing on paper

 

(print continuable)*2.

 

Inner cover open during

[1846]

printing on paper (print

 

NOT continuable)*2.

 

Inner cover open before

[1851]

start of printing on paper

 

(print continuable)*1.

 

Inner cover open during

[1856]

printing on paper (print

 

NOT continuable)*1.

 

Inner cover closed before

[1850]

start of CD / DVD

 

printing (print

 

The paper is jammed. Clear the paper and press

Remove the jammed paper, and press the

[OK].

OK button.

Ink has run out. Replace the ink tank and close

Replace the empty ink tank(s), and close

the cover. (U041)

the cover.

 

Pressing the OK button will clear the

 

error without ink tank replacement,

 

however, ink may run out during

 

printing.

The following ink tank cannot be recognized.

Install the applicable ink tank(s)

(Applicable ink tank icon) (U043)

properly, and confirm that the LED's of

 

all the ink tanks light red.

Print head is not installed. Install the print head.

Install the print head properly.

(U051)

 

Error code

Turn the machine off, and turn it on

 

again. If the error is not cleared, the print

 

head may be defective. Replace the print

 

head.

Inner cover is open. Close the inner cover and

Close the inner cover, and press the OK

press [OK].

button.

 

Close the inner cover, and press the OK

 

button. The paper being printed at error

 

occurrence will be ejected without

 

printing the remaining data for the

 

ejected paper, then printing will resume

 

from the next page.

 

Close the inner cover, and press the OK

 

button.

 

Close the inner cover, and press the

 

Stop/Reset button to clear the error. The

 

paper being printed at error occurrence

 

will be ejected without printing the

 

remaining data for the ejected paper, then

 

printing will resume from the next page.

Open the inner cover, place the CD-R tray and

Open the inner cover which functions as

press [OK].

the CD / DVD tray feeder, set the CD /

 

DVD tray in the feeder, and press the OK

1-5

Image 10
Contents Pixma MP800 Trademarks Canon INCManual Outline II. Table of Contents Part Periodic maintenance MaintenanceAdjustment Periodic replacement partsProduct Life Customer MaintenanceReplacement consumables MachineSerial Number Location Special ToolsInk tank target value Part 1 1. Maintenance List of Error Display / Indication Operator Call Errors by Alarm LED Lit in OrangePage Vbus Other Error Messages Press the OK button to clear the error. Troubleshooting by Symptom When enlarged in the carriage movement direction When enlarged in the paper feed direction Part 1 2. List of Error Display / IndicationAt replacement After replacementRepair Part 1 3. Repair Special Notes on Repair Servicing External cover, scanner unit, and FAU removalPage Page Connector Location and PIN Layout Page Operation panel removal Flexible cable and harness wiring, connection Page With the bottom case unit and AC adapter removed Grease application To the table of contents To the top White sponge sheet attachment Waste ink counter settingSolenoid position Service mode User modeFront door damper position See 3-4. Verification Items, 1 Service test print Times Orange Alarm Page Times Absorbers Page Part 1 3. REPAIR, 3-3 3 to Service test print Verification ItemsEeprom information print Print sampleHdeeprom Scan Error History 5020Printed items To the table of contents To the top Machine Transportation Technical Reference NEW Technologies Printing via Bluetooth communication optional Part 2 1. NEW TechnologiesCleaning Mode and Amount of INK Purged Part 2 2. Cleaning Mode and Amount of INK Purged Print Mode Copying To the table of contents Scan Mode Temporary operational solution ASFCleaning by user ServicePrint Results Skewed paper feeding SG-101 Paper feeding from Page Part 2 5. FAQ Appendix Pixma MP800 Specifications ScannerSupported ink tanks CopyDirect printing Dpof BIP, OPP, SPP, Hcrp Part 3 3. Pixma MP800 SpecificationsHcrp
Related manuals
Manual 4 pages 33 Kb