8 B |
results
Skewed paper feeding
- |
- Paper feeding from the |
ASF |
- 10 sheets (max.) set in |
the ASF |
Since the
When 10 sheets of paper are set in the ASF, and if they warp significantly, the warping portions of paper get over the cover guide, not being aligned along the guide properly.
-Straighten the paper.
-Set 5 or less sheets of paper in the ASF.
- Paper feeds at |
an angle. |
- A margin |
appears on |
printouts. |
9 | B |
10 | B |
11 | A |
12 C
13 A
results
results
Image
scanning
Display on
the LCD
Image
scanning
Uneven printing at the trailing edge of paper
Print smeared
Spots on a scanned image
Improper trimming in Layout print (orientation difference of an image between the LCD and a printout)
Improper area of cropping, or skewed scanning
- In the low temperature |
and low humidity |
environment |
- When the inner cover |
is not completely |
closed. |
- |
printing |
- Glossy photo (original) |
- In the high humidity |
environment |
- Card Direct printing |
- Photos taken with a |
DoCoMo mobile |
phone |
-Scanning using MP Navigator
-MP Navigator settings:
Document type:
Black and white document, or color document
Document size: Auto detect
Due to decrease of the friction coefficient and inaccurate print head alignment.
When printing on paper is done with the inner cover open, the print immediately after ink is ejected on paper is scratched by the bottom of the inner cover, resulting in smeared print.
When a glossy photo is strongly pressed on the platen glass, the photo will stick to the glass, and the stuck points are scanned as spots.
For photos in general, both the thumbnail and the original image are in landscape.
However, when original images are in portrait while thumbnails are in landscape, the trimming frame shifts from the correct position in some instances.
Due to a bug in MP Navigator 2.0.
Since the automatic cropping process is incorrect, improper correction of skewed scanning is done depending on a document, resulting in the skewed scanning.
-Perform Manual print head alignment.
-Perform Bottom plate cleaning.
Close the inner cover completely.
-Do not strongly press the photo on the platen glass.
-Clean the platen glass (to eliminate any moisture).
The phenomenon is left as is.
-An information sheet regarding the phenomenon is packed with the machine in early production.
-MP Navigator will be upgraded on a
-If the phenomenon occurs, cancel "auto detect" and select the paper
- Uneven printing |
at the bottom of |
the paper. |
- Printing gets |
smeared. |
- Spots appear on |
the scanned |
image, though |
there is no such |
spots on the |
original |
document. |
- Print result |
differs from |
what is |
displayed on |
the LCD. |
-An image is scanned at an angle.
-Some portions of an image is not scanned.