continuable)*1. |
|
Inner cover closed during | [1855] |
CD / DVD printing (print |
|
NOT continuable)*1. |
|
Multiple ink tanks of the | [1681] |
same color installed. |
|
Ink tank in a wrong | [1680] |
position. |
|
Warning: The waste ink | [1700] |
absorber becomes almost |
|
full. |
|
More than one ink tank of the following color is installed. (U075)
Some ink tanks are not installed in place. (U072)
The waste ink absorber is almost full. Press [OK] to continue but early replacement recommended. <See manual>
button.
Open the inner cover, and press the OK button to clear the error. The CD or DVD being printed at error occurrence will be ejected without printing the remaining data for the ejected CD or DVD, then the next print job will be done.
Replace the wrong ink tank(s) with the correct one(s).
Install the ink tank(s) in the correct position.
Press the OK button.
The service call error, indicating the waste ink absorber is full, is likely to occur soon.
The connected digital | [2001] |
camera or digital video |
|
camera does not support |
|
Camera Direct Printing. |
|
Automatic duplex | [1310] |
printing cannot be |
|
performed.
Incompatible device detected. Remove the device.
This paper is not compatible with duplex printing. Remove the paper and press [OK].
Remove the cable between the camera and the machine.
Press the OK button to eject the paper being used at error occurrence. Printing will resume from on the front side of the next page. Data which was to be printed on the back side of paper at error occurrence is skipped (not printed).
Failed in automatic print [2500] | Auto head align has failed. Press [OK] and |
head alignment. | repeat operation. <See manual> |
Press the OK button.
-If paper is being fed at error occurrence, the error is indicated after the paper is ejected.
-If the error occurs, the print head alignment values are not changed.
-After exit from the error by the Stop/Reset button, the automatic print head alignment will not be
The remaining ink | [1683] |
amount unknown. |
|
Ink tank not recognized. [1684]
Ink tank not recognized. [1410 to 1419]
Scanning unit (printer | [1200] |
cover) open. |
|
(Applicable ink tank icon)
The remaining level of the following ink cannot be correctly detected.
(Applicable ink tank icon)
The following ink tank cannot be recognized. (U140)
(Applicable ink tank icon)
The following ink tank cannot be recognized. (U150)
Cover is open. Close the cover.
An ink tank which has once been empty is installed. Replace the applicable ink tank with a new one.
Printing with a
If printing is continued without replacing the refilled ink tank, press the Stop/Reset button for 5 sec. or longer to record the use of a refilled ink tank.
Note:
After the above operation, the function to detect the remaining ink amount is disabled.
A
An error occurred in an ink tank (the ink tank LED is turned off). Replace the ink tank(s).
Close the scanning unit (printer cover).
*1: Only for models supporting CD / DVD printing
*2: Only for models not supporting CD / DVD printing