Canon MP800 manual

Page 35

4) Open the scanning unit (printer cover) to display the color pattern. Only the ON/OFF button is enabled.

5) Press the ON/OFF button to return to the service mode menu selection.

<Waste ink amount setting procedures>

Set the waste ink amount data to a replaced new EEPROM after the logic board is replaced in servicing.

1)Before replacement of the logic board ass'y, check the waste ink amount in EEPROM information print. [See 3-4. Verification Items, (2) EEPROM information print.]

2)In the waste ink amount setting mode, press the Stop/Reset button the specified number of time(s) according to the waste ink absorber whose value should be transferred to the replaced new EEPROM. (Only the main waste ink absorber for the MP800)

Time(s)	Waste ink absorber	Remarks
0 times	Main waste ink absorber
1 time	Platen waste ink absorber	Not valid for the MP800
	Both the main and platen waste ink
		1-30

Image 35

Contents Pixma MP800 Canon INC TrademarksManual Outline II. Table of Contents Part Periodic replacement parts MaintenanceAdjustment Periodic maintenanceMachine Customer MaintenanceReplacement consumables Product LifeInk tank target value Special ToolsSerial Number Location Part 1 1. Maintenance Operator Call Errors by Alarm LED Lit in Orange List of Error Display / IndicationPage Vbus Other Error Messages Press the OK button to clear the error. Troubleshooting by Symptom When enlarged in the carriage movement direction Part 1 2. List of Error Display / Indication When enlarged in the paper feed directionRepair After replacementAt replacement Part 1 3. Repair External cover, scanner unit, and FAU removal Special Notes on Repair ServicingPage Page Connector Location and PIN Layout Page Operation panel removal Flexible cable and harness wiring, connection Page With the bottom case unit and AC adapter removed Grease application To the table of contents To the top Solenoid position Waste ink counter settingWhite sponge sheet attachment Front door damper position User modeService mode See 3-4. Verification Items, 1 Service test print Times Orange Alarm Page Times Absorbers Page Part 1 3. REPAIR, 3-3 3 to Verification Items Service test printPrint sample Eeprom information printPrinted items Scan Error History 5020Hdeeprom To the table of contents To the top Machine Transportation Technical Reference NEW Technologies Part 2 1. NEW Technologies Printing via Bluetooth communication optionalCleaning Mode and Amount of INK Purged Part 2 2. Cleaning Mode and Amount of INK Purged Print Mode Copying To the table of contents Scan Mode ASF Temporary operational solutionService Cleaning by userPrint Results Skewed paper feeding SG-101 Paper feeding from Page Part 2 5. FAQ Appendix Scanner Pixma MP800 SpecificationsDirect printing CopySupported ink tanks Dpof Hcrp Part 3 3. Pixma MP800 SpecificationsBIP, OPP, SPP, Hcrp

Related manuals

Manual 4 pages 33 Kb