IBM Lotus Sametime 7.5.1 | Release Notes |
Services.
After you have added a new IP address to the Sametime server, set up your DNS server to map the new IP address to a DNS name for the Sametime server Community Services.
For the Community Services, map the IP address to the DNS name
For example, you would map the new IP address to the DNS name
Step 4 - Configure the HTTPS
You must specify the new DNS name and port number for Community Services HTTPS connections in the Sametime Administration Tool.
1.Open the Sametime Administration Tool and select
2.In the Community Services
Host name:
Port number: 443
With this configuration, the Sametime Community Services multiplexer will listen for
Step 5 - Configure the Sametime Connect clients to connect to the new DNS name of the Community Services
To connect to a Sametime server configured to listen for HTTPS connections on the host name and port specified above, the Sametime Connect client must have the following settings in the Sametime Connectivity tab:
zThe "Host" setting must specify
Note If a Sametime 2.5 Connect client connects to a Sametime 7.5.x server using HTTPS on port 443 or 563, it is only necessary to enter the server name (www.sametime1.com) in the "Host" setting of the Sametime 2.5 Connect client. For example, enter "www.sametime1.com" instead of
zThe "Community port" setting must specify 443.
z"Use proxy" and "Use HTTPS proxy" must be selected. Enter the host name and port on which the Sametime Connect client connects to the HTTPS proxy.
Sametime 2.5 Connect client compatibility issue when connecting to a Sametime 7.5.x server on port 443 or 563
The Sametime 2.5 Connect client is designed to use HTTPS tunneling on ports 443 or 563 to connect to a server that uses multiple IP addresses.
When a Sametime 2.5 server is configured to listen for
42