IBM 71455DU manual

2.Make sure that all nodes in the multi-node configuration contain microprocessors that are the same cache size and type, and the same clock speed.

3.Connect the SMP Expansion cables. See “SMP Expansion cabling” on page 49 for instructions.

4.Connect all nodes to an ac power source and make sure that they are not running an operating system.

5.Access the network used by the multi-node configuration and connect and log in to the Remote Supervisor Adapter II Web Interface on the primary node. See the Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II User’s Guide for more information; then, continue with the procedure to create a scalable partition.

Note: The Remote Supervisor Adapter II Web Interface must be open to view, create, delete, or manage scalable partitions. Make sure that the Web Interface is open before you continue.

82IBM System x3950 Type 8878 and System x3950 E Type 8879: User’s Guide