TRENDnet BRF114 manual Configuration Program, Preparation

Setup

Configuration Program

The TW100-BRF114 contains an HTTP server. This enables you to connect to it, and confi- gure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers:

•Netscape V4.08 or later

•Internet Explorer V4 or later

Preparation

Before attempting to configure the TW100-BRF114, please ensure that:

•Your PC can establish a physical connection to the TW100-BRF114. The PC and the TW100-BRF114 must be directly connected (using the Hub ports on the TW100-BRF114) or on the same LAN segment.

•The TW100-BRF114 must be installed and powered ON.

•If the TW100-BRF114 's default IP Address (192.168.0.1) is already used by another device, the other device must be turned OFF until the TW100-BRF114 is allocated a new IP Address during configuration.

Using UPnP

If your Windows system supports UPnP, an icon for the TW100-BRF114 will appear in the system tray, notifying you that a new network device has been found, and offering to create a new desktop shortcut to the newly-discovered device.

•Unless you intend to change the IP Address of the TW100-BRF114, you can accept the desktop shortcut.

•Whether you accept the desktop shortcut or not, you can always find UPnP devices in My Network Places (previously called Network Neighborhood).

•Double - click the icon for the TW100-BRF114 (either on the Desktop, or in My Network Places) to start the configuration. Refer to the following section Setup Wizard for details of the initial configuration process.

9