TRENDnet BRF114 Connection Status - Telstra Big Pond, Telstra Big Pond Status Screen, IP Address

TW100-BRF114 User’s Guide

Connection Status - Telstra Big Pond

An example screen is shown below.

Figure 24: Telstra Big Pond Status Screen

Data - Telstra Big Pond Screen

Connection

Physical Address	The hardware address of this device, as seen by remote devices.
	(This is different to the hardware address seen by devices on the
	local LAN.)
IP Address	The IP Address of this device, as seen by Internet users. This
	address is allocated by your ISP (Internet Service Provider).
Connection Status	This indicates whether or not the connection is currently estab-
	lished.
	• If the connection does not exist, the "Connect" button can be
	used to establish a connection.
	• If the connection currently exists, the "Disconnect" button can
	be used to break the connection.
	• Normally, it is not necessary to use the Connect and Discon-
	nect buttons unless the setting "Connect automatically, as
	required" is disabled.
Connection Log
Connection Log	• The Connection Log shows status messages relating to the
	existing connection.
	• The Clear Log button will restart the Log, while the Refresh
	button will update the messages shown on screen.
Buttons
Connect	If not connected, establish a connection to Telstra Big Pond.

38