TRENDnet BRF114 manual Using your Web Browser, If you cant connect

TW100-BRF114 User’s Guide

Using your Web Browser

To establish a connection from your PC to the TW100-BRF114:

1.After installing the TW100-BRF114 in your LAN, start your PC. If your PC is already running, restart it.

2.Start your WEB browser.

3.In the Address box, enter "HTTP://" and the IP Address of the TW100-BRF114, as in this example, which uses the TW100-BRF114 's default IP Address:

HTTP://192.168.0.1

If you can't connect

If the TW100-BRF114 does not respond, check the following:

•The TW100-BRF114 is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command:

•Open the MS-DOS window or command prompt window.

•Enter the command:

ping 192.168.0.1

If no response is received, either the connection is not working, or your PC's IP address is not compatible with the TW100-BRF114 's IP Address. (See next item.)

•If your PC is using a fixed IP Address, its IP Address must be within the range 192.168.0.2 to 192.168.0.254 to be compatible with the TW100-BRF114 's de- fault IP Address of 192.168.0.1. Also, the Network Mask must be set to 255.255.255.0. See Chapter 4 - PC Configuration for details on checking your PC's TCP/IP settings.

•Ensure that your PC and the TW100-BRF114 are on the same network seg- ment. (If you don't have a router, this must be the case.)

10