TRENDnet BRF114 Remote Management Screen, Enable Remote, Port Number, Current, IP Address

Other Features and Settings

Remote Management

This feature allows you to manage the TW100-BRF114 via the Internet.

Figure 38: Remote Management Screen

Data - Remote Management Screen

Remote Management

Enable Remote	Enable to allow Management via the Internet. If Disabled, this device
Management	will ignore management connection attempts from the Internet.
Port Number	Enter a port number between 1024 and 65535 (8080 is recommend-
	ed). This port number must be specified when you connect (see
	below).
	Note: The default port number for HTTP (Web) connections is port
	80, but using port 80 here will prevent the use of a Web "Virtual
	Server" on your LAN. (See Advanced Internet - Virtual Servers)
Current	You must use this IP Address to connect (see below).
IP Address	This IP Address is allocated by your ISP. But if using a Dynamic IP
	Address, this value can change each time you connect to your ISP.
	So it is better if your ISP allocates you a Fixed IP Address.

To connect from a remote PC via the Internet

1.Ensure your Internet connection is established, and start your Web Browser.

2.In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the TW100- BRF114. If the port number is not 80, the port number is also required. (After the IP Ad- dress, enter ":" followed by the port number.)

e.g.

HTTP://123.123.123.123:8080

This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.

61