TRENDnet BRF114 Virtual Servers Screen, Properties, Enable, PC Server, Protocol, Internal Port No

Internet Features

Virtual Servers Screen

The Virtual Servers screen is reached by the Virtual Servers link on the Internet menu. An example screen is shown below.

Figure 33: Virtual Servers Screen

This screen lists a number of pre-defined Servers, and allows you to define your own Servers. Details of the selected Server are shown in the "Properties" area.

Data - Virtual Servers Screen

Servers

Servers	This lists a number of pre-defined Servers, plus any Servers you
	have defined. Details of the selected Server are shown in the
	"Properties" area.
Properties
Enable	Use this to Enable or Disable support for this Server, as required.
	• If Enabled, any incoming connections will be forwarded to the
	selected PC.
	• If Disabled, any incoming connection attempts will be blocked.
PC (Server)	Select the PC for this Server. The PC must be running the appro-
	priate Server software.
Protocol	Select the protocol (TCP or UDP) used by the Server.
Internal Port No.	Enter the port number which the Server software is configured to
	use.
External Port No.	The port number used by Internet users when connecting to the
	Server. This is normally the same as the Internal Port Number. If it
	is different, this device will perform a "mapping" or "translation"
	function, allowing the server to use one port address, while clients
	use a different port address.

51