SATO DR300 manual Label & Carbon Ribbon Specification, Operating Environmental Condition

DR300 Operator Manual Appendix A

Features		Graphics Print, Sequential Numbering, Line/Box, Print Position
		Adjustment, Back – Feed, Tear – Off, Calendar, Inverse Image,
		Zero Slash Selection, Non Standard Code Setting, Hex Dump,
		Customized Design Character (16 x 16, 24 x 24 dots)
Self Check/Detection		Head Error, Paper End, Ribbon End, Head Open, Memory Card
		Error, Test Print
Option		Touch Screen Unit, Cutter Unit, Dispenser Unit, PC Card
		(JEIDA Type II), Scanner, Cut Ticket/Tag Receiver, Full
		Qwerty Keyboard, Rewind Unit.
Label & Carbon Ribbon Specification
Label	Size	Min. W 32 mm – Max W 80 mm (inclusive of label web)
		Min. P 19 mm – Max W 181 mm (inclusive of label web)
	Thickness	0.1 mm – 0.26 mm
	Type	Rolled Paper
	Diameter	Max outer diameter : 250 mm
Carbon	Type	Wax, Wax/Resin
Ribbon	Length	300m/roll
	Width	Max 84 mm
	Winding	Face-in type

Operating Environmental Condition

Input Power Supply Voltage	Voltage AC 220V + - 10%
Power Consumption	Max 190 VA 130 W
Environmental Condition	Operating temperature	5~40 d.c.
	Operating humidity	30~80 d.c. (No Condensation)
	Storage temperature	-5~60 d.c.
	Storage humidity	30~90 d.c. (No Condensation)
	Except paper and carbon	ribbon

86