About This Guide
Purpose
The purpose of this Installation Guide is to provide explanations and procedures for installing and configuring the GT Series Three Phase Ethernet Communications Kit.
Scope
The Guide provides safety guidelines, procedures for installing the GT Series Three Phase Ethernet Communications Kit, as well as information about configuring the Ethernet Communications Kit protocol for proper operation. It does not provide details about the GT Three Phase Grid Tie Inverters. You need to consult the Operation manual and/or Installation manual for this information.
Audience
The Guide is intended for anyone who needs to install and operate the GT Series Three Phase Ethernet Communications Kit. Installers should be certified technicians or electricians.
Organization
This Guide is organized into three chapters:
Chapter 1, “Introduction”, contains a description of the Ethernet Communications Kit and lists the specifications and requirements needed for use.
Chapter 2, “Installation”, contains procedures on how to
Chapter 3, “Configuration”, describes how to configure and activate the Ethernet Communications Kit to establish communication with the Inverter.
iii
This guide for use by qualified personnel only