General Safety Precautions

Safety

1.When installing the Ethernet Communications Kit in GT Series Three Phase Grid Tie Inverters use only components recommended or sold by Xantrex. Doing otherwise may result in a risk of fire, electric shock, injury to persons, and will void the warranty.

2.Do not attempt to operate the Ethernet Communications Kit if it has been dropped, or received more than cosmetic damage during transport or shipping. If the Ethernet Communications Kit is damaged, or suspected to be damaged, see the Warranty section of this manual.

3.To reduce the risk of electrical shock, lock-out and tag the inverters before attempting any maintenance, service, or cleaning.

Personal Safety

Follow these instructions to ensure your safety while installing the Ethernet Communications Kit in Inverter Grid Tie Inverters.

Qualified Personnel

Only qualified personnel should perform the transportation, installation and initial operation and maintenance of the GT Series Three Phase Grid Tie Inverters in accordance with National Electrical Code ANSI/NFPA 70, as well as all state and local code requirements. Follow all national accident prevention regulations.

Qualified personnel, within the meaning of these basic safety regulations, will be people who are familiar with the installation, assembly, start-up and operation of the GT Series Three Phase Grid Tie Inverters and have the appropriate qualifications with respect to their functions.

Safety Equipment

Authorized service personnel must be equipped with standard safety equipment including the following:

•Safety glasses and ear protection

•Steel-toed safety boots and safety hard hats

•Padlocks and tags

•Appropriate meter to verify that the circuits are de-energized (1000 Vac and DC rated, minimum)

Check local safety regulations for other requirements.

153553

vii

This guide for use by qualified personnel only